Alpina B4 3.0T 462 hp
2020
Available chiptunings
Stage 1
| Power | Torque | |
|---|---|---|
| Original | 462 hp | 700 Nm |
| Gain | + 188 hp | + 150 Nm |
| Stage 1 | 650 hp | 850 Nm |
Software only, on an otherwise standard vehicle. No hardware changes are required.
Stage 2
| Power | Torque | |
|---|---|---|
| Original | 462 hp | 700 Nm |
| Gain | + 238 hp | + 150 Nm |
| Stage 2 | 700 hp | 850 Nm |
For vehicles with supporting hardware already fitted — typically a downpipe, an intercooler or an intake upgrade. The hardware has to be on the vehicle before the file is written.
E85+
| Power | Torque | |
|---|---|---|
| Original | 462 hp | 700 Nm |
| Gain | + 188 hp | + 150 Nm |
| E85+ | 650 hp | 850 Nm |
E85 calibration pushed further, for vehicles with the supporting hardware for it.
ECUs used by this vehicle
ZF 8HPxx Bosch MG1CS024
Available options
Performance
E85 Flex-Fuel Vmax OFF
Driveability and comfort
Cold start OFF Sport button Sport display
Sound
Pop & Bang
Emission systems
These options disable emission control systems. Applying them to a vehicle used on public roads is not permitted in the EU or in many other countries, and it will normally invalidate the vehicle's type approval, its roadworthiness certificate and its insurance. We supply them for off-road, competition and export use only. As a professional, the customer is responsible for how the file is used and for complying with the law in the country where the vehicle is registered.
DPF / GPF OFF DTC OFF Decat